
- Description
- Size Guide
Double Stack Hinged Septum Clicker Daith Rook Ear Ring 1.2mm 8mm - Choice 4 Colours
Bar Thickness: 1.2mm (16 Gauge )
Internal Diameter: 8mm
Colours Available: Silver, Gold, Black, Rose Gold
To insert: The Ring opens from the top and clicks into place. Make sure it's lined up before clicking together Please note all sizes are approximate and the photograph is not the actual size of the item. I have taken the best picture possible.
Colours may vary from screen to screen.
Please see the measurements within the description.
Please check all measurements before purchasing.
Suitable for the following piercing: ♥Ear piercing ♥Daith ♥Rook ♥Cartlidge & many more Jewellery Type - Ring
Please note this is for 1 Ring if you require a pair or more select the amount.
► Please NOTE: Due to health/hygiene reasons, our earrings/piercings can not be returned. ►
Jewelry is measured through a gauge system (see chart below). The higher the gauge number the smaller the wire is. A standard "earring" is usually 20 gauge. Jewelry gauges/sizes can vary between manufacturers. There is no universal regulation on companies to make a standard size in body jewelry. A big part of this is that some jewelry is made overseas and measured in millimeters. And in the USA jewelry is measured in inches/gauges. So many times jewelry can be anywhere from .5mm to 1mm different.
CONVERSION CHART:
Gauge | Millimeter | Inch |
---|---|---|
16g | 1.2mm | 3/64" |
14g | 1.6mm | 1/16" |
12g | 2mm | 5/64" |
10g | 2.4mm | 3/32" |
8g | 3.2mm | 1/8" |
6g | 4mm | 5/32" |
4g | 5mm | 3/16" |
2g | 6mm | 1/4" |
0g | 8mm | 5/16" |
00g | 9mm to 10mm | 3/8" |
11mm | 7/16" | |
13mm | 1/2" | |
14mm | 9/16" | |
16mm | 5/8" | |
19mm | 3/4" | |
22mm | 7/8" | |
25mm | 1" | |
26.9mm | 1-1/16" | |
28.5mm | 1-1/8" | |
30.1mm | 1-3/16" | |
31.7mm | 1-1/4" | |
33.3mm | 1-5/16" | |
34.9mm | 1-3/8" | |
36.5mm | 1-7/16" | |
38.1mm | 1-1/2" | |
39.6mm | 1-9/16" | |
41.2mm | 1-5/8" | |
44.4mm | 1-3/4" | |
47.6mm | 1-7/8" | |
51mm | 2" |